The term wreck diver is typically associated with recreational diving, and exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. For more information on wreck diving, please read the following. Here are some key tips to help get you started. First, get your equipment ready! There are many types of equipment. The difference between a dangerous and fun dive is how you choose your gear.
Non-penetration wreck diving
You can learn a lot about non-penetration wreck diving if you are new to diving. First, wrecks are often places to fish. Divers need to be aware if there are lines or nets. Also, divers should be aware of the terrain beneath them. Currents and sharp edges can cause them to drift away from their desired destinations. This type of terrain is dangerous and it's best to avoid wreck diving.
Technical penetration diving may seem easier than it is, however, there are still dangers. The dangers of diving in the light zone include overhead hazards, proximity to the wreck structure, and the possibility of getting caught in tight passageways. The presence of silt and/or mud in wrecks can also make orientation difficult and severely affect visibility. Non-penetration wreck diving is best. Divers should stay in the light zone and then move to an exit point.
A view of a sunken ruin
Not only are traditional surveys required, but also the use of specific equipment and an in-depth knowledge of the maritime history surrounding the wreck must be done. The survey method used depends on how accurate and time-consuming it is. It may include a GPS position fix or a tape baseline. Or offset and ties measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
A shipwreck survey's objective is to locate the vessel and determine its exact location. It should also identify navigational hazards, environmental conditions, and historical events. The survey report should contain a summary detailing the vessel's structural features and the incident that led to its sinking. It also should mention any archeological investigations. It should also be possible to plot the location on a nautical map in order to take precise measurements.
Equipment required
You should be familiar with the shipwreck before you dive it. Learn about the layout of the wreck, its key points and potential hazards. Knowing these things will help you prepare for your dive and minimize the chances of an accident. Below you'll find the information you need to dive in a shipwreck. Make sure to read through this checklist before diving and bring it with you to the dive site.
Proper buoyancy control is crucial to not lose your way in the darkness. For wreck diving, you need to have good buoyancy control. A weight belt and buoyancy control tank are essential for wreck diving. A weight belt and a regulator are necessary if you want to have fun diving. These two pieces of equipment will ensure that you and others are safe.