The term wreck diver is typically associated with recreational diving, and exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. To learn more about wreck diving, read on. These are some important tips to get you started in wreck diving. First, get your equipment ready! There are many types of equipment. The right equipment can make the difference between a safe and dangerous dive.
Wreck diving that is not pierced
You can learn a lot about non-penetration wreck diving if you are new to diving. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. The underlying terrain may have sharp edges, and currents could transport them from the place they want. While it's not advisable to dive in this type of terrain, non-penetration wreck diving is a good option.
Technical penetration diving may seem easier than it is, however, there are still dangers. Avoiding the light zone means you can be exposed to overhead hazards, close proximity to the wreck structure and risk getting trapped in narrow passageways. Silt and mud can cause visibility problems and make orientation extremely difficult. These dangers can be avoided by non-penetration dives. The diver must stay within the light zone, and only move to the exit point.
A sunken wreck is surveyed
Not only are traditional surveys required, but also the use of specific equipment and an in-depth knowledge of the maritime history surrounding the wreck must be done. Depending on your time and requirements, you may use a combination GPS position fix, tape baseline, or offset with ties measurements. There are many methods that can be used to survey a sunken wreck.
A shipwreck survey aims to identify the vessel as well as its location. It should also include information about navigational hazards and environmental conditions. The survey report should include a description of the vessel's structures, the incident that resulted in its sinking, and any other archeological studies. It should also be possible to plot the location on a nautical map in order to take precise measurements.
Equipment needed
Knowing the basics of a shipwreck is essential before you dive into it. Learn about the layout of the wreck, its key points and potential hazards. This will allow you to prepare for your dive and decrease the risk of getting into an accident. Here are the details of what equipment you'll need for diving a shipwreck. This checklist is important to review before you dive. You can also bring it to the dive site.
Proper buoyancy control is crucial to not lose your way in the darkness. Wreck diving requires good buoyancy control. You shouldn't dive in deep waters without a weight belt or a buoyancy controller tank. A weight belt and a regulator are necessary if you want to have fun diving. These two pieces of equipment will ensure that you and others are safe.